Sullage pump out facilities are available on the fuel jetty.​
Sullage Pump Out Instructions​

1. Secure vessel safely alongside the sullage pump out facilities located on the fuel jetty.​
2. Remove cap from the boat's waste deck fitting.​
3. Securely connect pump out suction hose to waste deck fitting using an appropriate adapter if needed. The suction hose end has a 2" female camlock fitting. ​
4. Open the valve on the suction hose to start the suction. NOTE: The suction hose has constant vacuum, no start-up or activation is required. ​
5. Once sullage tank/s are empty, close valve on suction hose and disconnect from the boat's deck waste fitting. ​
6. Rinse the suction hose and fittings with water and stow neatly on jetty.​
7. Replace cap to the boat's deck waste fitting.